Does buck company make a 6 in 4 jaw chuck

[ome]

And if they do, where so buy one.
Enco only carries buck 3 jaws
thanks
jon

 

[Bill C.]

And if they do, where so buy one.
Enco only carries buck 3 jaws
thanks
jon

Ebay has one Buck listed for a Hartage Lathe for $300. Used Might need a face plate to mount it on your lathe. Good luck

 

[dave2176]

I see Grizzly carries a 4 jaw Buck in 6.5" but it is a scroll chuck. I think independent jaws in a 4 jaw. No experience with them but Grizzly carries 4 jaw BIson and Southbend chucks with independent jaws.
Dave

 

[DMS]

It looks like they do, and you can buy direct from them

http://store.buckchuck.com/independ...nt-chucks/4-4-jaw-independent-solid-jaws.html

 

[Chuck K]

Wow....750.00 for a 6" 4 jaw chuck. That's a bit more than I would pay for one....but then I'm kinda cheap that way.

Chuck

 

[Richard King]

Check with Polar Tool in Mpls. They sell good used chucks and new eastern European brands. He told me he does not sell good chucks at Enco prices. So please don't try to negotiate by saying " I can buy one on Enco".