R8 & 3/4” Shank Tooling Holder

[mmcmdl]

Use some kind of attachment with rings for the shelves to rest on, then the shelve can be removable, and everything taken apart. Maybe roll pins for metal washers to rest on, then the shelves?

Split lock collars . Fully adjustable and removeable would be my choice .

 

[Firstram]

Weld the bottom shelf and use pins for the uppers, keep your options open!

 

[erikmannie]

I won’t have time to work on this project for another 2+ days.

 

[matthewsx]

I don't think this is going on an ocean going yacht

Rust never sleeps.

 

[erikmannie]

Rust never sleeps.

My project is going to Hell in a handbasket LOL.

 

[mattthemuppet2]

Rust never sleeps.

Galvanic corrosion needs an electrolyte. Unless there's allot of salt water in Erik's workshop I think it'll be fine.

 

[Jim F]

Galvanic corrosion needs an electrolyte. Unless there's allot of salt water in Erik's workshop I think it'll be fine.

It take less than you think........

 

[pontiac428]

If the iron sleeves and steel bolts aren't rotting themselves out of all the electrolyte water cooled aluminum engine blocks around the world, then a collet rack should be okay with a little bit of mixed metals. It's not like it's a bridge or a skyscraper or anything like that. Although it's darn near a museum piece.

 

[stupoty]

No , don't do that . The first witness mark in the table is a killer in your mind , just like a new car or truck .

No , it's just a place to put your coffee cup to hide and then make a slight rust circle

Stu

 

[stupoty]

No , don't do that . The first witness mark in the table is a killer in your mind , just like a new car or truck .