- Joined
- Jan 16, 2016
- Messages
- 302
I GOT THE 10" WHEEL ON E-BAY FOR 20 BUCKS . THE SWING ON MY LATHE IS 11" .
IT HAD A SQUARE TAPERED HOLE THAT I BORED OUT TO 1.250"
![DSC_0846.JPG DSC_0846.JPG](https://www.hobby-machinist.com/data/attachments/83/83675-6613080db759c0410f50024138001caa.jpg)
I USED THE PRESS TO MAKE PARTS FOR ITSELF HERE IT IS BROACHING THE FIRST OF 2 KEY SLOTS .
![DSC_0858.JPG DSC_0858.JPG](https://www.hobby-machinist.com/data/attachments/83/83677-a5ed7ee88a7daece82bea443ebb055f0.jpg)
THE CUTTER FOR THE GEAR TOOTH IS A SINGLE FLUTE DEAL THAT I GROUND BY HAND FROM AN OLD 3/8" ENDMILL .
IT DOES NOT HAVE TO BE PERFECT , JUST CLEARANCE TO THE LAST TOOTH .
BY THE WAY , THE PITCH OF THE RACK IS 11mm .
HERE IS THE GEARSHAFT AFTER IT WAS TURNED DOWN AND THE SPACER & 3/16" KEYS IN PLACE .
![DSC_0871.JPG DSC_0871.JPG](https://www.hobby-machinist.com/data/attachments/83/83678-f25522adea10ff7d8c9ead0dc4571a63.jpg)
THE M8 HOLE IN THE CENTER IS FOR THE BOLT THAT KEEPS THE NEW HANDWHEEL
IN PLACE . I USED THE BRASS BECAUSE IT's NICE MATERIAL & I HAVE PLENTY OF IT .
I MADE THE KEYS FROM 1/4" HEX STOCK OF ALL THINGS .
IT HAD A SQUARE TAPERED HOLE THAT I BORED OUT TO 1.250"
![DSC_0852.JPG DSC_0852.JPG](https://www.hobby-machinist.com/data/attachments/83/83676-6d21d5d96fb769b5cfc94836de10250c.jpg)
![DSC_0846.JPG DSC_0846.JPG](https://www.hobby-machinist.com/data/attachments/83/83675-6613080db759c0410f50024138001caa.jpg)
I USED THE PRESS TO MAKE PARTS FOR ITSELF HERE IT IS BROACHING THE FIRST OF 2 KEY SLOTS .
![DSC_0858.JPG DSC_0858.JPG](https://www.hobby-machinist.com/data/attachments/83/83677-a5ed7ee88a7daece82bea443ebb055f0.jpg)
THE CUTTER FOR THE GEAR TOOTH IS A SINGLE FLUTE DEAL THAT I GROUND BY HAND FROM AN OLD 3/8" ENDMILL .
IT DOES NOT HAVE TO BE PERFECT , JUST CLEARANCE TO THE LAST TOOTH .
BY THE WAY , THE PITCH OF THE RACK IS 11mm .
HERE IS THE GEARSHAFT AFTER IT WAS TURNED DOWN AND THE SPACER & 3/16" KEYS IN PLACE .
![DSC_0871.JPG DSC_0871.JPG](https://www.hobby-machinist.com/data/attachments/83/83678-f25522adea10ff7d8c9ead0dc4571a63.jpg)
THE M8 HOLE IN THE CENTER IS FOR THE BOLT THAT KEEPS THE NEW HANDWHEEL
IN PLACE . I USED THE BRASS BECAUSE IT's NICE MATERIAL & I HAVE PLENTY OF IT .
I MADE THE KEYS FROM 1/4" HEX STOCK OF ALL THINGS .
Last edited: