New purchase Sanford SG-10 Benchtop Surface Grinder resto and parts needed

[9t8z28]

I just received the oil cups and bought a few cans of Rustoleum Hammered paint until I found the right grey color. Tonight I began turning the motor pulley. I am using a piece of 4140 PH for the motor pulley. I got a hold of mixdenny on PM forums. He wrote the Sanford biography on lathes.co.uk. We spoke about the different size pulleys that Sanford offered and a few other things. He is very helpful and full of knowledge. I decided on a 1.6” motor pulley and a 1” spindle pulley. Neither pulley will be crowned but the spindle pulley will have flanges.

 

[9t8z28]

Here are the oil cups. The straight and 90’s are both 1/4” inlet and made by Gits.

 

[9t8z28]

Here is the start of the 1.6” motor pulley. Its 4140 PH and so far its turning pretty easy