-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
Machining A36 plate
- Thread starter alloy
- Start date
- Joined
- Jul 5, 2014
- Messages
- 2,844
No doesn't have to be 5/8". 5/8" is what I had on hand.
I just bought this. The outside profile is very loose as to dimensions. can be .005 over or undersized. I used a 5/8' rougher/finisher and the finish was acceptable. So I just bought this off ebay. A rougher/finisher keeps me from having to finish the profile with another tool which cuts machine wear and tear.
I just bought this. The outside profile is very loose as to dimensions. can be .005 over or undersized. I used a 5/8' rougher/finisher and the finish was acceptable. So I just bought this off ebay. A rougher/finisher keeps me from having to finish the profile with another tool which cuts machine wear and tear.
1/2" VARIABLE ROUGHER FINISHER 4 FLUTE CARBIDE END MILL nACo COATED CUTTING TOOL | eBay
⬤ Best â Good. HARDENED STEEL.
www.ebay.com