- Joined
- Aug 1, 2022
- Messages
- 137
I was running with the belt on the middle cone. I tried spindle speeds of 600 and 800 RPM.Move your belt to a middle range.
The high speed is too fast and reduces the torque.
It has a small contact area and is quicker to slip.
Sent from my SM-G781V using Tapatalk
I was also using the Longitudinal feed with gearbox at 0.0018”, 0.0016” & 0.0015” (Feed in Thousandths), as well as manual feeding.
I ordered a test bar so I’ll be aligning the tailstock when it arrives.
Thanks.