This manual has the bearing numbers listed,
They are
Front cone=14137A
Rear cone=14125A
Cups=14274
my original timken “X” bearings are toast, I replaced them with new timken bearings from motion industries, and they don’t cut it, they have different runout readings depending on which direction I rotate the spindle, it’s noticable in the work.
unfortunately finding precision class replacements was impossible, nobody I tried makes them or sells them or can source them, so if anyone comes up with a good alternative I’m sure a few of us would be greatly appreciative.
I even spent a little time looking at what would be involved to replace them with some A/C bearings, but that kind of thing is a pretty involved science that I am not proficient in.
They are
Front cone=14137A
Rear cone=14125A
Cups=14274
my original timken “X” bearings are toast, I replaced them with new timken bearings from motion industries, and they don’t cut it, they have different runout readings depending on which direction I rotate the spindle, it’s noticable in the work.
unfortunately finding precision class replacements was impossible, nobody I tried makes them or sells them or can source them, so if anyone comes up with a good alternative I’m sure a few of us would be greatly appreciative.
I even spent a little time looking at what would be involved to replace them with some A/C bearings, but that kind of thing is a pretty involved science that I am not proficient in.