- Joined
- Oct 4, 2016
- Messages
- 7,031
My new setup is verified level by the bullseye , and the digital level. the digital is 0.0, and when flipped it flashes 0.0 to 0.1 and settles there.
I am contemplating my mental competence for this operation.
First attempt
If I set the level down, and look for it to find it's self a level alignment rotating 360 it is marked on the glass plate, and flipped. It buries the bubble to my right of center.
Next,
I set the bubble level, mark the glass plate, and flip, it buries to the right
3rd
I start the bubble all the way to the right. I bring the bubble all the way past center to the left side one division at a time, and when I flip it it returns full right. I did not go to full left past the divisions.
Start, and always returned here
The farthest I went left one division at a time from the start.
I am contemplating my mental competence for this operation.
First attempt
If I set the level down, and look for it to find it's self a level alignment rotating 360 it is marked on the glass plate, and flipped. It buries the bubble to my right of center.
Next,
I set the bubble level, mark the glass plate, and flip, it buries to the right
3rd
I start the bubble all the way to the right. I bring the bubble all the way past center to the left side one division at a time, and when I flip it it returns full right. I did not go to full left past the divisions.
Start, and always returned here
The farthest I went left one division at a time from the start.