Any chance you would know where to find ball oilers for my machine would you? Standard 6mm are too small. They mic out at 6.4mm which I believe is about a 1/4 inch
-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
Swapping from a 143T to a 143TC motor
- Thread starter Pevehouse
- Start date
- Joined
- Feb 2, 2013
- Messages
- 4,100
McMaster Carr should have them
Forgot to check there, thank you
- Joined
- Feb 2, 2013
- Messages
- 4,100
i do have access to some 1/4 brass ball oilers like these...
how long are the old ones???
how long are the old ones???
About a 1/4 inch. The depth shouldn’t matter for my machine though. I did order some from McMaster. I will try them and let you know what I find. They were pricey though,lol about $50 for 20 pieces with shipping
- Joined
- Feb 2, 2013
- Messages
- 4,100
That’s not too bad under $3 a pop with shipping
Not really that bad. They are nickel plated steel. Kind of like the ones that came in it
