Seeking laser pointer for drill press center

[cazclocker]

First, thanks to you guys for taking time to answer my question. I found the laser guide in question available from a several vendors. I have to agree that the laser lines look pretty fat, too fat for some work. I even found a couple of youtube videos showing how the twin laser lines can line up a Forstner bit - I'd never thought of that problem!

It seems to me that I'll probably get one because it seems to be good for some work, but not all work. If I wanted (for example) a series of 5/16" holes spaced exactly 3/4" apart in wood, then I bet the laser guide would get me close, but there would be spacing differences that would be readily apparent.

Thanks -
Doug in Arizona

 

[AR1911]

I'd use one in the DP, but not the mill

 

[Kennyd]

I consider those lines VERY FAT. Are they accurate enough for your purposes? I won't even use the laser line that came on my chop saw.

I'd use one in the DP, but not the mill

Exactly, its drill press...not a mill. For the average Joe drilling holes they are fine-especially for woodworking.