Quality 2-flute HSS end mill sets?

[jlficken]

Does anyone have a recommendation for a quality 1/8”-1/2” set of end mills?

 

[Ulma Doctor]

Kennemetal and SECO make the good stuff.
You might want to check out 3 flute endmills too

 

[mmcmdl]

You might want to check out 3 flute endmills too

If he can use 3 flute , I have a ship pot full of them . Clevelands in original tubes . I always preferred 3 flute over 2 flute . Better for cutting keyways .

 

[jlficken]

Kennemetal and SECO make the good stuff.
You might want to check out 3 flute endmills too

Would 3-flute still work for plunge cutting/drilling though?

 

[mmcmdl]

Would 3-flute still work for plunge cutting?

Yes , they are center cutting .

 

[jlficken]

Yes , they are center cutting .

Good to know…thanks!

If you can’t tell I’m new to this and thought that only 2-flute were center cutting.

 

[mmcmdl]

I posted these months back . I'll clear them out of the basement for $55 shipped . I've added a 1/2" to this group .

https://www.hobby-machinist.com/threads/mini-mill-end-mills.111082/

 

[jlficken]

I posted these months back . I'll clear them out of the basement for $55 shipped . I've added a 1/2" to this group .

https://www.hobby-machinist.com/threads/mini-mill-end-mills.111082/

Message sent.

 

[ChazzC]

I posted these months back . I'll clear them out of the basement for $55 shipped . I've added a 1/2" to this group .

https://www.hobby-machinist.com/threads/mini-mill-end-mills.111082/

Deliver with the microscope in January?

 

[mmcmdl]

Deliver with the microscope in January?

Jamie wants them . Good deal on some nice end mills .