DIY Android DRO

Gentlemen,
thank you for the feedback. It's greatly appreciated :)
So it looks like the preference a printable manual with "companion" videos. Double the work, but I asked for it ;) I'll get right on it then...

Thank you
Yuriy
 
I also think a printable version would be great along with a video presentation .

I would also like to thank Yuriy for taking the time to create a such a great project and sharing it with all of us.

Bob
 
Both would be nice. I think I have all the parts. Just need to find some time to put it together. Thanks for sharing your talents.
 
Not sure if I should ask this here or start another thread, but figured if people did a search they'd look here...

I built the first of my two MSP430 controllers today, it makes pretty lights, the tablet can find the bluetooth but I'm not getting the MSP430 Flasher to load the hex file. It connects, but says "* Warning: Default options used due to incomplete argument list" and the hex file doesn't get loaded. I have a log of what's going on if it's helpful.

Here's the log...

Sat Aug 24 18:12:57 2013: * -----/|-------------------------------------------------------------------- *
Sat Aug 24 18:12:57 2013: * / |__ *
Sat Aug 24 18:12:57 2013: * /_ / MSP430 Flasher v1.2.2 *
Sat Aug 24 18:12:57 2013: * | / *
Sat Aug 24 18:12:57 2013: * -----|/-------------------------------------------------------------------- *
Sat Aug 24 18:12:57 2013: * Evaluating triggers...
Sat Aug 24 18:12:57 2013: - A device name was not entered. For the
Sat Aug 24 18:12:57 2013: - correct run syntax please use trigger -h.
Sat Aug 24 18:12:57 2013: -
Sat Aug 24 18:12:57 2013: - Please enter the name of the device you
Sat Aug 24 18:12:57 2013: - are trying to access or enter n to abort:
Sat Aug 24 18:13:41 2013: -n msp430g2553 -w DigitalReadoutBasic_v1.2.hex -v
Sat Aug 24 18:13:41 2013: * Checking for available FET debuggers:
Sat Aug 24 18:13:41 2013: * Found USB FET @ HID0014:COM3.
Sat Aug 24 18:13:41 2013: * Initializing interface on TIUSB port...done
Sat Aug 24 18:13:41 2013: * Checking firmware compatibility:
Sat Aug 24 18:13:41 2013: * FET firmware is up to date.
Sat Aug 24 18:13:41 2013: * Reading FW version...done
Sat Aug 24 18:13:41 2013: * Reading HW version...done
Sat Aug 24 18:13:41 2013: * Powering up...done
Sat Aug 24 18:13:41 2013: * Accessing device...done
Sat Aug 24 18:13:42 2013: * Reading device information...done
Sat Aug 24 18:13:42 2013: *
Sat Aug 24 18:13:42 2013: /* ---------------------------------------------------------------------------
Sat Aug 24 18:13:42 2013: * UseCase : MSP430Flasher.exe
Sat Aug 24 18:13:42 2013: * Arguments :
Sat Aug 24 18:13:42 2013: * Warning: Default options used due to incomplete argument list.
Sat Aug 24 18:13:42 2013: * ----------------------------------------------------------------------------
Sat Aug 24 18:13:42 2013: * Driver : loaded
Sat Aug 24 18:13:42 2013: * Dll Version : 20409001
Sat Aug 24 18:13:42 2013: * FwVersion : 30394216
Sat Aug 24 18:13:42 2013: * Interface : TIUSB
Sat Aug 24 18:13:42 2013: * HwVersion : E 2.0
Sat Aug 24 18:13:42 2013: * Mode : AUTO
Sat Aug 24 18:13:42 2013: * Device : MSP430G2xx3
Sat Aug 24 18:13:42 2013: * EEM : Level 1, ClockCntrl 1
Sat Aug 24 18:13:42 2013: * VCC ON : FALSE
Sat Aug 24 18:13:42 2013: * ----------------------------------------------------------------------------
Sat Aug 24 18:13:42 2013: * Powering down...done
Sat Aug 24 18:13:42 2013: * Disconnecting from device...done
Sat Aug 24 18:13:42 2013: *
Sat Aug 24 18:13:42 2013: * ----------------------------------------------------------------------------
Sat Aug 24 18:13:42 2013: * Driver : closed (No error)
Sat Aug 24 18:13:42 2013: * ----------------------------------------------------------------------------
Sat Aug 24 18:13:42 2013: */


Any ideas... Yuriy? Bueller? Anyone?
 
Rennkafer said:
Not sure if I should ask this here or start another thread, but figured if people did a search they'd look here...

I built the first of my two MSP430 controllers today, it makes pretty lights, the tablet can find the bluetooth but I'm not getting the MSP430 Flasher to load the hex file. It connects, but says "* Warning: Default options used due to incomplete argument list" and the hex file doesn't get loaded. I have a log of what's going on if it's helpful.

Here's the log...

Sat Aug 24 18:12:57 2013: * -----/|-------------------------------------------------------------------- *
Sat Aug 24 18:12:57 2013: * / |__ *
Sat Aug 24 18:12:57 2013: * /_ / MSP430 Flasher v1.2.2 *
Sat Aug 24 18:12:57 2013: * | / *
Sat Aug 24 18:12:57 2013: * -----|/-------------------------------------------------------------------- *
Sat Aug 24 18:12:57 2013: * Evaluating triggers...
Sat Aug 24 18:12:57 2013: - A device name was not entered. For the
Sat Aug 24 18:12:57 2013: - correct run syntax please use trigger -h.
Sat Aug 24 18:12:57 2013: -
Sat Aug 24 18:12:57 2013: - Please enter the name of the device you
Sat Aug 24 18:12:57 2013: - are trying to access or enter n to abort:
Sat Aug 24 18:13:41 2013: -n msp430g2553 -w DigitalReadoutBasic_v1.2.hex -v
Sat Aug 24 18:13:41 2013: * Checking for available FET debuggers:
Sat Aug 24 18:13:41 2013: * Found USB FET @ HID0014:COM3.
Sat Aug 24 18:13:41 2013: * Initializing interface on TIUSB port...done
Sat Aug 24 18:13:41 2013: * Checking firmware compatibility:
Sat Aug 24 18:13:41 2013: * FET firmware is up to date.
Sat Aug 24 18:13:41 2013: * Reading FW version...done
Sat Aug 24 18:13:41 2013: * Reading HW version...done
Sat Aug 24 18:13:41 2013: * Powering up...done
Sat Aug 24 18:13:41 2013: * Accessing device...done
Sat Aug 24 18:13:42 2013: * Reading device information...done
Sat Aug 24 18:13:42 2013: *
Sat Aug 24 18:13:42 2013: /* ---------------------------------------------------------------------------
Sat Aug 24 18:13:42 2013: * UseCase : MSP430Flasher.exe
Sat Aug 24 18:13:42 2013: * Arguments :
Sat Aug 24 18:13:42 2013: * Warning: Default options used due to incomplete argument list.
Sat Aug 24 18:13:42 2013: * ----------------------------------------------------------------------------
Sat Aug 24 18:13:42 2013: * Driver : loaded
Sat Aug 24 18:13:42 2013: * Dll Version : 20409001
Sat Aug 24 18:13:42 2013: * FwVersion : 30394216
Sat Aug 24 18:13:42 2013: * Interface : TIUSB
Sat Aug 24 18:13:42 2013: * HwVersion : E 2.0
Sat Aug 24 18:13:42 2013: * Mode : AUTO
Sat Aug 24 18:13:42 2013: * Device : MSP430G2xx3
Sat Aug 24 18:13:42 2013: * EEM : Level 1, ClockCntrl 1
Sat Aug 24 18:13:42 2013: * VCC ON : FALSE
Sat Aug 24 18:13:42 2013: * ----------------------------------------------------------------------------
Sat Aug 24 18:13:42 2013: * Powering down...done
Sat Aug 24 18:13:42 2013: * Disconnecting from device...done
Sat Aug 24 18:13:42 2013: *
Sat Aug 24 18:13:42 2013: * ----------------------------------------------------------------------------
Sat Aug 24 18:13:42 2013: * Driver : closed (No error)
Sat Aug 24 18:13:42 2013: * ----------------------------------------------------------------------------
Sat Aug 24 18:13:42 2013: */


Any ideas... Yuriy? Bueller? Anyone?
Click to expand...

Bill,
I'm trying to figure out what's going on. I'll post a solution once I find one...

Thank you
Yuriy
 
You must log in or register to reply here.

Similar threads

B
Can you cut a Magnetic read head lines and change the connector?
Replies
4
Views
193
borges1
B
T
How to tram junk
2 3 4 5 6 7
Replies
64
Views
2K
RaisedByWolves
RaisedByWolves
C
Newbie machining project
Replies
1
Views
158
mmcmdl
mmcmdl
Back
Top