- Joined
- Nov 13, 2013
- Messages
- 107
Hello Forum
I have stud seized by rust in an aluminum motorcycle case. I've made various attempts to remove this part such as; cleaned it up, heat, cold, heat, cold with penetrating oil, double nut, love taps............
Before things really turn to sheet and I break it off flush with the case. I have considered and induction heater and alum. I'd love to hear what the experts say.
Thanks again!
and
I have stud seized by rust in an aluminum motorcycle case. I've made various attempts to remove this part such as; cleaned it up, heat, cold, heat, cold with penetrating oil, double nut, love taps............
Before things really turn to sheet and I break it off flush with the case. I have considered and induction heater and alum. I'd love to hear what the experts say.
Thanks again!
and
Dissolve Steel Drill Bits In Alum From The Grocery
Breaking a stud or a bolt is a pretty common shop catastrophe, but one for which a fair number of solutions exist. Drill it out, shoot in an extractor, or if you’re lucky, clamp on some Vise-…
hackaday.com