- Joined
- May 16, 2016
- Messages
- 1,701
I like it has a real ring to it.. I got mine from google translate.It will do, but unlettered barbarian is closer...
I like it has a real ring to it.. I got mine from google translate.It will do, but unlettered barbarian is closer...
Mark,I am not sure where to put this but I think it fits here. Many of you know I make my own tooling and my primary reason ( besides I need it) is to show others how to have quality tooling at a low cost. I got an email from someone, don't know if they are on here or another forum I used to belong to, but the email made me angry in the sense they said " you can't make all the stuff you say you made". Short of photos, I would invite anyone to my shop to see for themselves what can be done with very little. These photos are the tooling I have made in the last 6 months ( or at least most of it), and the total cost for material for all this is under $250. that being said , I have access to a lot of scrap at the moment. There are a LOT of hours here also, but I don't count that making for myself.
View attachment 88704
View attachment 88705
View attachment 88706
I really don't know what else to say,
Mark Frazier
View attachment 88704 View attachment 88705 View attachment 88706
Dang Dick,Mark,
You do very nice work and I have seen quite a bit of what you do over the years.
I always enjoy seeing what you do and am amazed at how much work you get done in a short amount of time.
Also, here is a picture of my most recent project representing 11 years of on and off effort.
Dick
WOW!!!! It will almost be a sin to use that and get it dirty.Mark,
You do very nice work and I have seen quite a bit of what you do over the years.
I always enjoy seeing what you do and am amazed at how much work you get done in a short amount of time.
Also, here is a picture of my most recent project representing 11 years of on and off effort.
Dick
Beautiful.Mark,
You do very nice work and I have seen quite a bit of what you do over the years.
I always enjoy seeing what you do and am amazed at how much work you get done in a short amount of time.
Also, here is a picture of my most recent project representing 11 years of on and off effort.
Dick
WOW!!!! It will almost be a sin to use that and get it dirty.
It is absolutely beautiful.
Mark you do very nice work, and only an unlettered barbarian would be low enough to critisize it. I wish I had the time to make the lovley tools you make.
Is the drill sharpener 88706 just a drill sharpener or will it also sharpen end mills. I will soon have a need for sharpening end mills and the cost of tool and cutter grinders is prohibitive, especially here in Downunder and rarely if ever do second hand items come up. I think I'll have to make my own, but need to keep it simple.
The drill sharpener will not do end mills. With that said, I had thought about adapting it to sharpen the ends of mill cutters which would not be too difficult but it would not sharpen the sides of the cutters.
Yes, I posted a build of my drill sharpener. In fact I built two and I think they are both on here.Being able to sharpen the ends would be a good start. Did you post a build on that drill sharpener