• Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!

  • In order for the Member Map to work properly, you must allow Google services AND Hobby Machinist to know your location. These settings are found in your browser of choice and in your Hobby Machinist profile.

Winner Home Grown Cutter Grinder

  • Thread starter Thread starter Bill Gruby
  • Start date Start date
Status
Not open for further replies.
That can be done Stan. I will give it some thought. While I have you here and you others to, what do you think of using a 5 inch diameter. 3 legged spider handle to raise and lower the wheel spindle assembly??

"Billy G"
 
Bill Gruby said:
That can be done Stan. I will give it some thought. While I have you here and you others to, what do you think of using a 5 inch diameter. 3 legged spider handle to raise and lower the wheel spindle assembly??

"Billy G"
Click to expand...
I'm not exactly following where that would go, Bill. Are you saying, instead of the brass knob?
 
To replace this white knob. That rod raises and lowers the wheel head assembly. Utilizing a spider will speed it up.

"Billy G" 102_0516 (800 x 531).jpg

102_0516 (800 x 531).jpg
 
Bill Gruby said:
That can be done Stan. I will give it some thought. While I have you here and you others to, what do you think of using a 5 inch diameter. 3 legged spider handle to raise and lower the wheel spindle assembly??

"Billy G"
Click to expand...


I like it! :thumbsup:

Dave
 
Sounds like a cool idea to me Bill!!

sent from my hand held hickymajig
 
Bill Gruby said:
To replace this white knob. That rod raises and lowers the wheel head assembly. Utilizing a spider will speed it up.

"Billy G"View attachment 71679
Click to expand...
Oh yeah!!! Spider wheel for sure. :applause:

You're having way too much fun with this. Besides,...... I want to see how you make the spider wheel.:whistle:


Marcel
 
This one is too big but it is a start on the concept. It's made from scrap. The finished wheel will be Brass and the legs will be topped with Brass Balls.

"Billy G"

102_0572 (800 x 531).jpg
 
Bill Gruby said:
This one is too big but it is a start on the concept. It's made from scrap. The finished wheel will be Brass and the legs will be topped with Brass Balls.

"Billy G"
Click to expand...

Bill that doesn't work for me, and I have been watching this project faithfully. I think it should be like a wheel with three spokes and a circular periphery.

David
 
I really appreciate that you came forward with that David. I was hoping someone would see that. It was a good idea but just doesn't fit the rest of the work. I had to see it to find out. I am going back to the drawing board on this on. Maybe a wheel with a fold down handle. I will get it right.

"Billy G"
 
Status
Not open for further replies.
Back
Top