A few years back I got a good deal on a late '90s Mill-Right router table, which was a conventional woodworkers router table with a milling table setup on the back side of the fence. It was crazy complicated but very stoutly constructed. Now I have concluded that the mill table is not worth the additional weight so I have removed it. But I hate to just scrap it because it is very accurate and well engineered. I have been following HM for some time now and am enormously impressed by the imagination and capability of the members. So I am offering it free to anyone who feels they could use it.
The first 3 photos show it still mounted on the router table. It is only the part with the t-slots.
The last 5 show the table itself and that is what you would get. It can be clamped in all manner of crazy configurations with multiple positive stops. It weighs about 40 - 45 pounds and I would happily break into 2 pieces and box them up separately. Shipping would be on you but I will be responsible for secure boxing. (though I would prefer you pick up here in NC). The extension tables in the last photo are your option and weigh probably an additional 20 - 25 pounds.
Please take this thing. I know you could use it.
The first 3 photos show it still mounted on the router table. It is only the part with the t-slots.
The last 5 show the table itself and that is what you would get. It can be clamped in all manner of crazy configurations with multiple positive stops. It weighs about 40 - 45 pounds and I would happily break into 2 pieces and box them up separately. Shipping would be on you but I will be responsible for secure boxing. (though I would prefer you pick up here in NC). The extension tables in the last photo are your option and weigh probably an additional 20 - 25 pounds.
Please take this thing. I know you could use it.
