0MT-0JT DRILL CHUCK ARBOR Needed but Can't find

[Forty Niner]

I have a small Albrecht keyless chuck with Jacobs #0 taper
My Sherline tailstock is #0 Morse taper

I would like to use the Albrecht chuck in my Sherline lathe, so I need a
0MT-0JT DRILL CHUCK ARBOR

Thanks, Any help would be appreciated.

 

[Red96]

KBC,0MT-0JT DRILL CHUCK ARBOR,1-507-009,KBC Tools & Machinery

KBC,0MT-0JT DRILL CHUCK ARBOR,1-507-009,KBC Tools & Machinery

www.kbctools.com

 

[davidpbest]

Drill Chuck Arbor 0MT J0 0 Morse Taper JT0 | eBay

Morse Taper 0. Drill Chuck Arbor. A hardened and ground drill chuck arbor. Jacobs Taper 0.

www.ebay.com

 

[ChazzC]

Like this:

#O Morse Arbor OJT - Sherline Products

Press fit arbor

www.sherline.com

 

[Forty Niner]

So nice to have the help. Thanks guys. I am on off to order one now!
Decided to buy the one out of U.K. KBC machinery in California has high shipping charges
The Sherline one is most likely mild steel and not hardened and ground.

 

[SouthernChap]

So nice to have the help. Thanks guys. I am on off to order one now!
Decided to buy the one out of U.K. KBC machinery in California has high shipping charges
The Sherline one is most likely mild steel and not hardened and ground.

Yeah Rotagrip are good fellas.

I visited their premises last year to pick up an order and they were very friendly and it felt like they genuinely knew what they were talking about.

They had a good sized ground floor, absolutely rammed with used machine tools. Whilst I was talking to the owner (who's name escapes me), I asked him why he doesn't have all these machines up for sale on the internet and he shrugged his shoulders and ruefully said with the running of the business, he just didn't have the time to get everything catalogued and priced up.

They're one of my first stops when buying toolholding and workholding.

Their site is kinda clunky, though.

 

[ChazzC]

So nice to have the help. Thanks guys. I am on off to order one now!
Decided to buy the one out of U.K. KBC machinery in California has high shipping charges
The Sherline one is most likely mild steel and not hardened and ground.

Take a hard look at what you are considering: Sherline machines have short sockets and you may end up with a lot of stick-out if you go with a standard arbor.

 

[Forty Niner]

Take a hard look at what you are considering: Sherline machines have short sockets and you may end up with a lot of stick-out if you go with a standard arbor.

You may be correct regarding the short socket on the tailstock. I'll find out, and if the U.K. arbors don't work, and can't be cut to fit, then I will order from Sherline. It's not big money either way. No more than a hamburger and fries these days!

 

[ChazzC]

You may be correct regarding the short socket on the tailstock. I'll find out, and if the U.K. arbors don't work, and can't be cut to fit, then I will order from Sherline. It's not big money either way. No more than a hamburger and fries these days!

Yes, sad when you don’t get much change from $20/£15 when getting a basic snack! Please keep us updated.