YOU OWN A central machinery 9x20 lathe???

[riversidedan]

looking at a well used central machinery 9x20 lathe and needing to know if anyone here has one.............reply here if ya do

 

[C-Bag]

I have one. It was basically unused and tricked out according to the mods laid out by Steve Adair. It’s a poor man’s Emco.

 

[riversidedan]

ok am buying one tommorrw thats either been well used or is just dirty and needs a good cleaning, also needs a front lever part that broke off ................. it does cuts threads right?? also am also assuming jet parts will interchange??

 

[C-Bag]

also needing a front lever part

?? Hope you know parts might be tough to get hold of.

 

[riversidedan]

?? Hope you know parts might be tough to get hold of.

was assuming jet parts will interchange ???

 

[C-Bag]

You know what they say about assuming…..

 

[riversidedan]

you have one thats why Im asking

 

[C-Bag]

I go with Grizzly. Their 9x19 so far has been the same.

 

[riversidedan]

I have one. It was basically unused and tricked out according to the mods laid out by Steve Adair. It’s a poor man’s Emco.

 

[tq60]

Harbor freight usually hs decent parts support.

Sent from my SM-G781V using Tapatalk