Good News, I have the lathe now running with all of the functions/features operating on it.
It has been a long and trying battle getting everything to work. The final issue was solved by installing a 220 Volt AC
power line into the electronics of the lathe. Why they removed this power cord from the lathe is any ones guess. This ended up
being the source of much of my problems with getting the VFD to work.
With the power control of the lathe being on the saddle there is no need for a remote switch now and the feature of having a Potentiometer
mounted on the lathe versus using the internal transmission is a issue for a later date.
My supplier of the VFD was a major disappointment, as once they had my money for the VFD they became silent. I was however able to get information
and some on-line manuals from the manufacture.
Here is a link to the Huanyang HY and SL series of VFD's
http://www.hy-electrical.com/download3.htm
I am still waiting for them to provide me with a on line manual covering the GT series that I have.
It is my hope that others might benefit from the issues that I had and I want to especially thank those individuals on this site who took time to try and assist me
it is greatly appreciated.
Now I am off to make some Chips!
Best Regards
Al