- Joined
- Nov 15, 2016
- Messages
- 943
Simple two pulley calculator : Two Pulley Calculator All you need is section and length and any good industrial transmission or bearing factor will be able to supply.
One of the belts is hidden so apart from tearing it apart and waiting, I was hoping to get info 1st.Simple two pulley calculator : Two Pulley Calculator All you need is section and length and any good industrial transmission or bearing factor will be able to supply.
I have a similar model. Here's the model number and serial number for mine.
I have the manual for it and it shows Model RC-33 for the model.
The belts are listed as: 428-06-133-0001 Matched Set of 3 V-Belts.
View attachment 342289
View attachment 342290
I have a similar model. Here's the model number and serial number for mine.
I have the manual for it and it shows Model RC-33 for the model.
The belts are listed as: 428-06-133-0001 Matched Set of 3 V-Belts.
View attachment 342289
View attachment 342290
As I suspected, these are not the same model. Here's a rough drawing I made when I had the cover off. As you can see the cover shape is different. The feed engage handle protrudes through the front side of the housing. The main drive belt is easy to measure but the feed belt is behind and not accessible without disassembly.Four screws to take the end cover off. What? 1 minute? you could then measure the centre distance of the pulleys and the pulley diameters.