- Joined
- Aug 3, 2017
- Messages
- 2,437
Progress has slowed, I started umpiring a few nights a week which costs shop time!
I decided to get the doors on the castings, which just requires a 1/16" drill bit long enough to do it.
Here is 1/2 way through the round part.
And my setup for the square doors:
And almost done with that part:
And both done with the pins!
I worked a bit on the handle for the round door, but ran outa time before I could finish.
I decided to get the doors on the castings, which just requires a 1/16" drill bit long enough to do it.
Here is 1/2 way through the round part.
And my setup for the square doors:
And almost done with that part:
And both done with the pins!
I worked a bit on the handle for the round door, but ran outa time before I could finish.