A couple of bearings (6003RS) in a gear hub feel rough so I decided to change them out. In the past I have always been able to get single ball bearings removed using pullers. This is the first time that requires pulling two bearings out together. My puller uses a single 1/2-NF bolt but the bearings don't budge. If I had a hydraulic press that would be my plan B but unfortunately I don't have a press of any kind.
If you have any suggestions for me I am all ears. Ultimately I am ready to ask a shop with a million ton press and pay them to remove the bearings but would like to know if I am missing something first.
If you have any suggestions for me I am all ears. Ultimately I am ready to ask a shop with a million ton press and pay them to remove the bearings but would like to know if I am missing something first.