Toolbox liner suggestions

Shallow plastic trays would hold them in their place . They tend to bunch up otherwise because they they breed and multiply at night . At least that's my theory . ;)
Kinda like clothes hangers and Cub Cadets in which case Ya gotta cover their eyes so they can't look at each other!
 
Kinda like clothes hangers and Cub Cadets in which case Ya gotta cover their eyes so they can't look at each other!
Nothing ever helped with the Cadet issues around here ! :grin:
 
Nothing ever helped with the Cadet issues around here ! :grin:
Same here, they just have to be in close proximity to one another! Even being in separate building's don't seem to help much!
 
For affixing any mat use the 3M IO carpet tape. Its extremely sticky and durable. I use just 2" strips in the corners, center as needed. Use a knife to cut it...scissors will gum up very quickly.

3M Outdoor Carpet Tape
 
I’ve printed a bunch of trays:
cbdf9ff3cf321ac4f257854a9fb23b47.jpg

ee8ade5404917920aa4273c4090003b0.jpg
do you have the STL files ?
 
For affixing any mat use the 3M IO carpet tape. Its extremely sticky and durable. I use just 2" strips in the corners, center as needed. Use a knife to cut it...scissors will gum up very quickly.

3M Outdoor Carpet Tape
I have tried that, many times they just tear the material away and you are left with tape, and a mat that's bunched up with heavy tools...
GRRR
 
I have tried that, many times they just tear the material away and you are left with tape, and a mat that's bunched up with heavy tools...
GRRR
Then you need sturdier mat! :p

Jokes aside - I can see how that would happen. The 3M carpet tape is very strong.
 
do you have the STL files ?

I’m happy to share. Will try to get them together and post a link. I’ve sort of tweaked the design a bunch of times so not sure what I still have in stl.
 
Back
Top