OXA 250 QCTP or Original Lantern Tool Post

wa5cab said:
Atlas made two sizes of tool posts, a larger one for the 9", 10" and 12" and a smaller one for the 6". My rocker for the larger one is just a few thou over 3/8" wide (0.379"). None of the catalogs seem to give that dimension but I would guess that the 6" rocker is around 1/4" wide. But that should be enough info for you guys to determine whether of not the rockers that you have are for the 6" or not. Unfortunately, I don't have one.
Click to expand...
Hey , thanks Robert . I just came up from the basement after emptying some drawers and came up with 2 more . So I have 4 now . I'll post a pic and let him figure it out . :)
 
Rockers . I'm not going to spend too much time on this . Here they are . It's what I came up with .
 

Attachments

  • IMG_8800.JPG
    IMG_8800.JPG
    2.4 MB · Views: 9
All this old lantern type tooling . :grin: It'll go to the bay . I'll say one thing , they got the split parting toll holder right in the early years . It's no Iscar , but still pretty darn good . :)
 
Once again . No pic . Saturday night CRS . :rolleyes:
 

Attachments

  • IMG_8801.JPG
    IMG_8801.JPG
    3.2 MB · Views: 8
MMCMDL,

Did you figure out how to get into PM's? If not,. at the top of screen near the right end of the main tool bar, click on the icon that looks like a small envelope. Then click on Start Conversation (on this site, the PM system is called Conversations.

My guess is that the two top rockers in your first photo are for 6", the third one is for 9/10/12 and the fourth is larger.
 
You must log in or register to reply here.
Back
Top