Drawings for simple carbide insert toolholders. Anyone interested?

If You are not into quick change holders and still want Carbide please look at the picture of my first holder made of scraptanium and using CCMTs.
Next is the final version that has never been made as the first is good enough.

Regards

Niels

Boxford komp.jpg ccmtholder.jpg
 
Nelson edited my post abive and added links to the drawings. Have fun machining them. It's not hard. I made a set a few months back and have been using them ever since with no problems.

John
 
Nice work on the drawings, btw. I'll download the .pdf, as soon as I can find it, for future reference. (Showing my ignorance again :o but...) I'm a bit curious as to why three of the shanks are "notched".

Thanks much John,

-Ron
 
Last edited:
ScrapMetal said:
Nice work on the drawings, btw. I'll download the .pdf, as soon as I can find it, for future reference. (Showing my ignorance again :o but...) I'm a bit curious as to why three of the shanks are "notched".

Thanks much John,

-Ron
Click to expand...

It's a clearance feature so you can run the cutter closer to the chuck without hitting the jaws.

John
 
jgedde said:
It's a clearance feature so you can run the cutter closer to the chuck without hitting the jaws.

John
Click to expand...


That's what I would have guessed but I wanted to make sure in case I was missing something.

Thanks again,

-Ron
 
You must log in or register to reply here.
Back
Top