Anybody done business with them before? Reviews?
I just bought a bunch of stuff for my logan (see list below). I will give a review of anything on the list if anybody wants (contingent upon me getting around to using it).
The shipping was fast. Ordered on friday afternoon, shipped same day, and arrived monday. The guy I spoke to on the phone was a little hard to understand, but was very knowledgeable about his products. I got prompt replies to my emails. They threw in some free carbide bits. I haven't used any of the products so far, but my impression from unboxing them is that they are of expected quality or slightly above expected quality for cheap chinese goods.
The 3-jaw chuck is chock full of shavings and dust; will need to taken apart and cleaned and oiled.
The tool post bottom block it too big for a logan, and will need to be machined to fit. Also, I must use the supplied block because the bolt is an oddball metric thread M13.5X1.5 (probably supposed to be M14) and I don't have a tap like that.
Here's what I bought:
Item Number: 41046
Item Name: Carbide Inserts for Indexable Turning Tools
Price Each: $4.00
Quantity: 5
This Total: $20.00
Item Number: 41041
Item Name: Indexable Turning Tool Set
Price Each: $34.00
Quantity: 1
This Total: $34.00
Item Number: 41206
Item Name: Square Ground Tool Bits
Price Each: $8.00
Quantity: 1
This Total: $8.00
Item Number: 43402
Item Name: 95 Degree Indexable Broing Bars (Right Hand Cut)
Price Each: $29.00
Quantity: 1
This Total: $29.00
Item Number: 25456
Item Name: Semi Finished Threaded Back Plate For Plain Back Lath Chucks
Price Each: $56.00
Quantity: 1
This Total: $56.00
Item Number: 25434
Item Name: Reversable Jaw 3-Jaw Chuck (Plain Back)
Price Each: $132.00
Quantity: 1
This Total: $132.00
Item Number: 68566
Item Name: AXA Wedge Type Tool Post Set For Lathe Up to 12\"
Price Each: $98.00
Quantity: 1
This Total: $98.00
Item Number: 44501
Item Name: H.S.S. Center Drill Set
Price Each: $6.00
Quantity: 1
This Total: $6.00
Item Number: 23402
Item Name: Precision Live Centers
Price Each: $24.00
Quantity: 1
This Total: $24.00
Item Number: 21322
Item Name: Drill Chuck Shanks (MT Taper)
Price Each: $5.00
Quantity: 1
This Total: $5.00
Item Number: 21320
Item Name: Drill Chuck Shanks (MT Taper)
Price Each: $5.00
Quantity: 1
This Total: $5.00
Item Number: 25006
Item Name: Drill Chucks
Price Each: $19.00
Quantity: 1
This Total: $19.00
Item Number: 25001
Item Name: Drill Chucks
Price Each: $7.00
Quantity: 1
This Total: $7.00
Item Number: 70002
Item Name: Piloted Spindle Tapper
Price Each: $10.00
Quantity: 1
This Total: $10.00
Item Number: 39002
Item Name: Scriber(Two Points, H.S.S.)
Price Each: $2.00
Quantity: 1
This Total: $2.00
Item Number: 34305
Item Name: Screw Pitch Gage U.S. Standard 60°
Price Each: $6.00
Quantity: 1
This Total: $6.00
Item Number: 34306
Item Name: Screw Pitch Gage - Metric 60°
Price Each: $6.00
Quantity: 1
This Total: $6.00
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Order Sub-Total: $467.00
Sales Tax (TX 0.00%): $0.00
Shipping Cost: $78.00
Total Cost: $545.00
I just bought a bunch of stuff for my logan (see list below). I will give a review of anything on the list if anybody wants (contingent upon me getting around to using it).
The shipping was fast. Ordered on friday afternoon, shipped same day, and arrived monday. The guy I spoke to on the phone was a little hard to understand, but was very knowledgeable about his products. I got prompt replies to my emails. They threw in some free carbide bits. I haven't used any of the products so far, but my impression from unboxing them is that they are of expected quality or slightly above expected quality for cheap chinese goods.
The 3-jaw chuck is chock full of shavings and dust; will need to taken apart and cleaned and oiled.
The tool post bottom block it too big for a logan, and will need to be machined to fit. Also, I must use the supplied block because the bolt is an oddball metric thread M13.5X1.5 (probably supposed to be M14) and I don't have a tap like that.
Here's what I bought:
Item Number: 41046
Item Name: Carbide Inserts for Indexable Turning Tools
Price Each: $4.00
Quantity: 5
This Total: $20.00
Item Number: 41041
Item Name: Indexable Turning Tool Set
Price Each: $34.00
Quantity: 1
This Total: $34.00
Item Number: 41206
Item Name: Square Ground Tool Bits
Price Each: $8.00
Quantity: 1
This Total: $8.00
Item Number: 43402
Item Name: 95 Degree Indexable Broing Bars (Right Hand Cut)
Price Each: $29.00
Quantity: 1
This Total: $29.00
Item Number: 25456
Item Name: Semi Finished Threaded Back Plate For Plain Back Lath Chucks
Price Each: $56.00
Quantity: 1
This Total: $56.00
Item Number: 25434
Item Name: Reversable Jaw 3-Jaw Chuck (Plain Back)
Price Each: $132.00
Quantity: 1
This Total: $132.00
Item Number: 68566
Item Name: AXA Wedge Type Tool Post Set For Lathe Up to 12\"
Price Each: $98.00
Quantity: 1
This Total: $98.00
Item Number: 44501
Item Name: H.S.S. Center Drill Set
Price Each: $6.00
Quantity: 1
This Total: $6.00
Item Number: 23402
Item Name: Precision Live Centers
Price Each: $24.00
Quantity: 1
This Total: $24.00
Item Number: 21322
Item Name: Drill Chuck Shanks (MT Taper)
Price Each: $5.00
Quantity: 1
This Total: $5.00
Item Number: 21320
Item Name: Drill Chuck Shanks (MT Taper)
Price Each: $5.00
Quantity: 1
This Total: $5.00
Item Number: 25006
Item Name: Drill Chucks
Price Each: $19.00
Quantity: 1
This Total: $19.00
Item Number: 25001
Item Name: Drill Chucks
Price Each: $7.00
Quantity: 1
This Total: $7.00
Item Number: 70002
Item Name: Piloted Spindle Tapper
Price Each: $10.00
Quantity: 1
This Total: $10.00
Item Number: 39002
Item Name: Scriber(Two Points, H.S.S.)
Price Each: $2.00
Quantity: 1
This Total: $2.00
Item Number: 34305
Item Name: Screw Pitch Gage U.S. Standard 60°
Price Each: $6.00
Quantity: 1
This Total: $6.00
Item Number: 34306
Item Name: Screw Pitch Gage - Metric 60°
Price Each: $6.00
Quantity: 1
This Total: $6.00
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Order Sub-Total: $467.00
Sales Tax (TX 0.00%): $0.00
Shipping Cost: $78.00
Total Cost: $545.00
