Added another car to the garage. 67 Nova

:) When I built the cross member it was for the Richmond 5 speed which is what the GForce modeled their GF5R after. The shifter location, and linkage did not fit the newer crossmembe, so I had to cut it apart, and make a new shifter side. I found a kink in the rear brake line that needs to be fixed, The fuel line from the tank needs to be run, The MSD, and the Race pac need to be wired, the digital dash has to be mounted, the roll bar has to be painted, the interior reinstalled, then the distributer needs to come out, and reprime the motor for oil circulation. The trailer hitch has to be fabricated(drag, and drive), and start it and drive it befor I race it.:eek 2:
 
Soo . . . by Saturday?

:grin::grin::grin:

Actually, thanks for the list. I can almost smell the burn out.
Stay safe. I think you're having plenty of fun.
 
Shifter tunnel is closed up, super boot is on, the shifter is for a bench seat, that will be changed out. I stole the seats out of my 70 Chevelle, and got those installed today, the carpet is pretty badly sun bleached, when I get irritated enough it will get higher priority. I still need to bleed brakes, hydraulic release bearing, wire the MSD, prime the motor, it hasn't run in awhile. Then we'll see what the gremlins have instore for me.
 
Waiting for my new MSD box to come, I swapped out some parts. The repop bumper was toast from the salt air here and being neglected, NOS headlight bezels, new grill, and a 67 Nova take off front bumper were added.
 
Last edited:
It's a crappy video, a little long, and the electric fans are noisy, BUT it's running. :drink:
The file size must have been too big to get all of the video in, it cut off moving to the front. Click on the picture, and unmute. I hope it works.
 
Last edited:
I had to pull the transmission because of too much finger to release bearing clerance, so I ordered a new adjustable hydraulic with spacers. the spacer combinations did not give me the clearance I wanted, so some calculations, material, and machines, I got what I wanted. Now to see if it works...

 
You must log in or register to reply here.
Back
Top