833-TV CNC conversion from Dr D-Flo project

Brief update, I've been procrastinating, primarily because I don't know what I'm doing and want to do things "right." Finally decided, if it doesn't smoke when I plug it in, I at least have a starting point. I've bench tested all the controls components and I'm trying to squeeze them into a 20x24x10 cabinet. I'm documenting as well as I can at https://github.com/attentiondeficitdisasters/mill_conversion_electrical

Note that the excel spreadsheet is actually up to date and I have not gone through and updated the schematics to exactly match. Wire numbers are different, etc.
 
FlyingAMortgage said:
Brief update, I've been procrastinating, primarily because I don't know what I'm doing and want to do things "right." Finally decided, if it doesn't smoke when I plug it in, I at least have a starting point. I've bench tested all the controls components and I'm trying to squeeze them into a 20x24x10 cabinet. I'm documenting as well as I can at https://github.com/attentiondeficitdisasters/mill_conversion_electrical

Note that the excel spreadsheet is actually up to date and I have not gone through and updated the schematics to exactly match. Wire numbers are different, etc.
Click to expand...
 
You must log in or register to reply here.
Back
Top