Splined gear hub.

Splined gear hub.

  • Reaction score 0
  • Comments 0
New 6908 bearing pressed into place on the top part of the bull gear bearing sleeve.

New 6908 bearing pressed into place on the top part of the bull gear bearing sleeve.

  • Reaction score 0
  • Comments 0
This is how I press my bearings into place. Using a large 3/4" drive socket. Pressing only on the outer race.

This is how I press my bearings into place. Using a large 3/4" drive socket. Pressing only on the outer race.

  • Reaction score 0
  • Comments 0
Press a new 6908 double sealed bearing into place. Fully seated on to the snap ring.

Press a new 6908 double sealed bearing into place. Fully seated on to the snap ring.

  • Reaction score 0
  • Comments 0
Bearing spacer in place.

Bearing spacer in place.

  • Reaction score 0
  • Comments 0
Installing the bearing spacer into the bull gear bearing sleeve. Set it on the inner race of the bottom bearing.

Installing the bearing spacer into the bull gear bearing sleeve. Set it on the inner race of the bottom bearing.

  • Reaction score 0
  • Comments 0
Installing the bearing spacer into the bull gear bearing sleeve.

Installing the bearing spacer into the bull gear bearing sleeve.

  • Reaction score 0
  • Comments 0
Installed bearing in the bottom of the bull gear bearing sleeve. View one.

Installed bearing in the bottom of the bull gear bearing sleeve. View one.

  • Reaction score 0
  • Comments 0
Installed bearing in the bottom of the bull gear bearing sleeve. View two.

Installed bearing in the bottom of the bull gear bearing sleeve. View two.

  • Reaction score 0
  • Comments 0
Install a new 6908 ball bearing on top of the wave spring washer. When pressing in a sleeve press on the outer race only.

Install a new 6908 ball bearing on top of the wave spring washer. When pressing in a sleeve press on the outer race only.

  • Reaction score 0
  • Comments 0
Install the wave spring washer in the bull gear bearing sleeve on the bottom...

Install the wave spring washer in the bull gear bearing sleeve on the bottom...

  • Reaction score 0
  • Comments 0
Wave spring for the bull gear bearing sleeve. Side view.

Wave spring for the bull gear bearing sleeve. Side view.

  • Reaction score 0
  • Comments 0
Next up the bull gear bearing sleeve.

Next up the bull gear bearing sleeve.

  • Reaction score 0
  • Comments 0
The pinion bearing cap with the wave spring washer gets put on using these two cap screws.

The pinion bearing cap with the wave spring washer gets put on using these two cap screws.

  • Reaction score 0
  • Comments 0
Install the complete pinion gear into the casing.

Install the complete pinion gear into the casing.

  • Reaction score 0
  • Comments 0
This is the Pinion bearing cap. Install the wave washer in it.

This is the Pinion bearing cap. Install the wave washer in it.

  • Reaction score 0
  • Comments 0
Installed top bearing and then press fit the key into the keyway.

Installed top bearing and then press fit the key into the keyway.

  • Reaction score 0
  • Comments 0
Next slide the top 6203 gear on all the way up to the shoulder on the shaft.

Next slide the top 6203 gear on all the way up to the shoulder on the shaft.

  • Reaction score 0
  • Comments 0
The pinion gear is fixed in place by a set screw.

The pinion gear is fixed in place by a set screw.

  • Reaction score 0
  • Comments 0
Lower part of the pinion gear shaft.

Lower part of the pinion gear shaft.

  • Reaction score 0
  • Comments 0
The lower 6203 bearing slides on followed by the pinion gear.

The lower 6203 bearing slides on followed by the pinion gear.

  • Reaction score 0
  • Comments 0
Pinion Gear Bearing. Same for top and bottom are the same type.

Pinion Gear Bearing. Same for top and bottom are the same type.

  • Reaction score 0
  • Comments 0
Where the pinion gear goes.

Where the pinion gear goes.

  • Reaction score 0
  • Comments 0
Pinion gear assembly with cover.

Pinion gear assembly with cover.

  • Reaction score 0
  • Comments 0
expressline99

Bridgeport Series 1 VS 2hp Rebuilding the Gear Housing

Rebuilding the gear housing. Putting it back together.
Click to expand...

Album information

Album owner
expressline99
Date created
Item count
99
View count
8,353
Comment count
2
Rating
0.00 star(s) 0 ratings

Album privacy

expressline99

expressline99

Media items
1,002
Albums
19
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top