I am about to buy a small taig mill, but have recently re-arranged my work area. Can someone tell me the following dimensions? Just a rough estimate. I can't find the exact info online.
What is the mounting base like?
Width/Depth required?
Are the rear mounting feet in line with the back of the mill?
How high is the Z handle? Is the 21" overall height including the motor?
My new work surface is basically 17" deep up to a height of 18". At the 18" point the depth drops to 12" from the front of the work bench. Ideally the Z handle would also be at or below 19 3/8". I can hang over the front no problem, but want to make sure the mounting base can clear everything.
Thanks for any help from current taig manual mill owners.
Attached a photo of my dilemma.
What is the mounting base like?
Width/Depth required?
Are the rear mounting feet in line with the back of the mill?
How high is the Z handle? Is the 21" overall height including the motor?
My new work surface is basically 17" deep up to a height of 18". At the 18" point the depth drops to 12" from the front of the work bench. Ideally the Z handle would also be at or below 19 3/8". I can hang over the front no problem, but want to make sure the mounting base can clear everything.
Thanks for any help from current taig manual mill owners.
Attached a photo of my dilemma.