- Joined
- Jun 15, 2011
- Messages
- 19
This should be an easy but it's been a tough one for me lately. I need to solder pieces of 1/4" x 3/4" C 360 brass bar stock together with soft solder. I tried propane but the bottle was almost empty and that was a no go. Next was Oxy-Acet but I'm not sure of the flame I need. I do a good job with brazing but obviously that requires too hot a flame for this application. Is there a web page, chart or video on the web that would help me? I'm having a difficult time visualizing the flame for the proper temperature needed.
Thanks,
Ed
Thanks,
Ed