Need a small part done

[JimW816]

I need to have a small part done. If someone can help me please get in touch with me . Please see attached drawing. Thanks

 

[dlane]

Got a pic ? , no room in iBooks for it,

 

[JimW816]

Thanks for replying. Here is the jpg. Let me know if you are not able to see. I can change M3 to #8 screw if you need to. I also can make thread myself in order to save your time.

 

[Groundhog]

Is this what you are looking for? Or is it dished out like a bowl?
And, I don't know if I can make it (need to think on it) - I was just trying to draw it!

 

[RandyM]

There is conflicting information in the drawing.

 

[JimW816]

I know very little about Sketchup. Here is what I did to combine 3D with 2D. I can change things to fit your tooling and machine if necessary. Thank you!

 

[markba633csi]

Yes what's with the "8" dimension up top next to the "13", it only shows in the one view
M

 

[RandyM]

Also be careful, it is first angle projection and not third.

 

[JimW816]

Yes what's with the "8" dimension up top next to the "13", it only shows in the one view
M

It is a mistake. I corrected it. Please see the correct drawing. Thanks.

 

[dennys502]

I didn't notice the dashed lines so I modeled it upside down the first time. the 1mm dim is not right as is the side view not depicted correctly.

This is what I came up with.