A
Andre
Forum Guest
Register Today
Well the lathe runs quite well. Quiet and everything works well except the power feed which I have to investigate. Takes a 1/4" wide chip in aluminum and on a finish cut it made a 5' chip. It came with a ton of beaded carbide tooling whisk I don't really like so I will have to grind up some hss later.
The flat belts are nice, they stall out before the motor stops and are very power efficient.
The 3 jaw is a cushman and the 4 jaw is a skinner, both real good brands. Ill try out the collet attachment later. It takes 2A collets...
there is a spider web inside the 5/16" one, I guess 1/4" was too small and 3/8" was too big LOL
Anybody have info on cluch repairs of a SB 13"?
The flat belts are nice, they stall out before the motor stops and are very power efficient.
The 3 jaw is a cushman and the 4 jaw is a skinner, both real good brands. Ill try out the collet attachment later. It takes 2A collets...
there is a spider web inside the 5/16" one, I guess 1/4" was too small and 3/8" was too big LOL
Anybody have info on cluch repairs of a SB 13"?
)