- Joined
- Aug 1, 2018
- Messages
- 16
On initial start lathe mode says off.In advanced screen scrolled to other, then lathe mode ,highlight ( null ) press null option, exit and save settings.Z still adds values to each direction of the quill movement.By the war factory reset code is 6008.Got that from vendor.What am I missingMike
You have the Lathe mode set to "on" in the Initial System page.
1 Hold the Enter button as you power on the scale.
2 Scroll down to Other Settings
3 Move over to Lathe Mode and change to NULL.
4 Exit and save your settings.
All done the Z axis is now separate from the other scales.
Ray
MIke