- Joined
- Jul 18, 2012
- Messages
- 14
Hi
[FONT=Verdana, Arial, Helvetica, serif]I am looking at the Grizzly tools G0704 The specs below are what I am concerned about What is the maximum size piece of 1/2" aluminum plate that I could work on? I would be putting 1/4 20 holes on one inch centers would I be able to do a 12" X 24 plate? What is the maximum size I could get away with ? I am thinking it would be double the specs since you can turn the piece around and do the other half but not sure. I am a newbie [/FONT]
[FONT=Verdana, Arial, Helvetica, serif][/FONT]
Thanks
Michael
http://www.grizzly.com/products/Drill-Mill-with-Stand/G0704
Table travel (longitudinal): 18-7/8"
Table travel (cross): 6-7/8"
Table size: 7-1/8" x 26-5/8"
[FONT=Verdana, Arial, Helvetica, serif]I am looking at the Grizzly tools G0704 The specs below are what I am concerned about What is the maximum size piece of 1/2" aluminum plate that I could work on? I would be putting 1/4 20 holes on one inch centers would I be able to do a 12" X 24 plate? What is the maximum size I could get away with ? I am thinking it would be double the specs since you can turn the piece around and do the other half but not sure. I am a newbie [/FONT]
[FONT=Verdana, Arial, Helvetica, serif][/FONT]
Thanks
Michael
http://www.grizzly.com/products/Drill-Mill-with-Stand/G0704
Table travel (longitudinal): 18-7/8"
Table travel (cross): 6-7/8"
Table size: 7-1/8" x 26-5/8"