- Joined
- May 2, 2014
- Messages
- 217
Re: Grizzly Tech Support Recommends Cutting Replacement Gibs to Length? - Disappointing Experience!!
That sounds like a good plan. Once they are mated up, small end to big end, mike them up end for end to see if the tapers are the same. If so, you are on the right track. Thin them up and have a go at it.
That sounds like a good plan. Once they are mated up, small end to big end, mike them up end for end to see if the tapers are the same. If so, you are on the right track. Thin them up and have a go at it.