- Joined
- Sep 10, 2022
- Messages
- 944
I am in the process of making a Fixture plate for my Tree Mill 2UVR. The plate is 24”x16”x.800 thick. I have 3/8”-16 tapped holes on a 2” grid. I also have 5/16@“ reamed holes for dowel pins on 2” grid.
Tapping in progress. I have some curved clamps to make to go along with the plate. These to be made later.
Cutting oil is my blood.
Tapping in progress. I have some curved clamps to make to go along with the plate. These to be made later.
Cutting oil is my blood.