Fixture Plate for Tree Mill

[twhite]

I am in the process of making a Fixture plate for my Tree Mill 2UVR. The plate is 24”x16”x.800 thick. I have 3/8”-16 tapped holes on a 2” grid. I also have 5/16@“ reamed holes for dowel pins on 2” grid.
Tapping in progress. I have some curved clamps to make to go along with the plate. These to be made later.

Cutting oil is my blood.

 

[twhite]

Finished the main part of the clamps. Next are the 2 piece washers.

There is a 1” range of travel.

Cutting oil is my blood.