- Joined
- Dec 28, 2022
- Messages
- 273
**Edit - Ok, I found a quick start manual for the V1000 - starting there. Looks like I need to verify the VFD is for Single or Three phase first. I'll do that and post back later today.
So it looks like the lathe came wired for 3 phase, I'll be using Single Phase 220. The second line on the ad for the lathe states: Inverter driven lathe can be used on 3-phase or 1-phase electricity. As people have stated, their manual sucks to say the least, and does not reference how to change this to Single Phase.
Has someone done this already, or have experience in doing this conversion with this VFD? I could really use some pointers if you wouldn't mind.
I can get more pics if people need, just tell me what you want to see. This is from their website, but it's exactly like mine. There is a pigtail coming out of the cabinet with clips on them already for L1, L2, L3, and E - 3 black and 1 Green/Yellow.
Thanks in advance
So it looks like the lathe came wired for 3 phase, I'll be using Single Phase 220. The second line on the ad for the lathe states: Inverter driven lathe can be used on 3-phase or 1-phase electricity. As people have stated, their manual sucks to say the least, and does not reference how to change this to Single Phase.
Has someone done this already, or have experience in doing this conversion with this VFD? I could really use some pointers if you wouldn't mind.
I can get more pics if people need, just tell me what you want to see. This is from their website, but it's exactly like mine. There is a pigtail coming out of the cabinet with clips on them already for L1, L2, L3, and E - 3 black and 1 Green/Yellow.
Thanks in advance
Last edited: