H
Hukshawn
Forum Guest
Register Today
I'm thinking about making some collet blocks for my R8 collet for the mill, mainly for tightening the nut in the vise before putting it in the mill.
I own a press, mini mill, and a 10" lathe and various hand tools. I need to cut a keyway to put a key in the block to slot in the R8 collet. Are my options limited to a needle file?
I own a press, mini mill, and a 10" lathe and various hand tools. I need to cut a keyway to put a key in the block to slot in the R8 collet. Are my options limited to a needle file?