Be careful when you take the handle hub off, the ball bearings will fall out. Unless the old gunk holds onto them.
thanks, I did not see ball bearings on the exploded drawing. I will go back and look again
If yours is like mine, there is a bushing there: no balls to fall out. You should be able to remove the handle and then clean and lube the assembly.
They are behind the hub and pushed on by the springs.
Randy, didn't someone post something a while back on working that assembly?
Yeah, It was probably me asking how to assemble the spring loaded balls. I was struggling with it at the time.
I found the thread.
http://www.hobby-machinist.com/threads/logan-6561h-compound-dial.53694/