- Joined
- Jan 20, 2018
- Messages
- 5,663
I finally got motivated to try to work this out.
It's still in the "proof of concept" phase, but I think it's going to work. I need a stronger spring for the disengagement. It works okay without any load but can't overcome the pressure of the lead-screw on the half-nut when actually cutting. First tests give a repeatability of about .005 in. or better.
It's still in the "proof of concept" phase, but I think it's going to work. I need a stronger spring for the disengagement. It works okay without any load but can't overcome the pressure of the lead-screw on the half-nut when actually cutting. First tests give a repeatability of about .005 in. or better.
Last edited: