- Joined
- Aug 23, 2013
- Messages
- 970
OK, I am looking for a face plate for my lathe. My lathe has a 2-1/4" x 8 tpi spindle. I found a face plate that says it is 2" by 8 tpi? Is there such a spindle with that spread or are the sellers on ebay just measuring the hole and are not compensating for the threads? Any Ideas? Thanks, Tim
this is the one I am looking at:
this is the one I am looking at:
11-3/4" LATHE FACE PLATE w/ 2"-8 THREADED MOUNT | eBay
This is an 11-3/4" Lathe Face Plate w/ 2"-8 TPI Threaded Mount. Threaded Mount: 2"-8 TPI. Plate Thickness: 1-5/8".
www.ebay.com