- Joined
- Mar 2, 2013
- Messages
- 895
Hey dave,
Nice looking mill and lathe. I do not know the answer to your belt question for an excello mill, I had a similar problem with my southbend, circa 1956 mill. After finding a manual for the mill, it seems I would need to pull off the motor to gain access to the gears. While this was by no means impossible, I decided to use a link belt instead.
This may help you around your situation.
Hth
Rich
Nice looking mill and lathe. I do not know the answer to your belt question for an excello mill, I had a similar problem with my southbend, circa 1956 mill. After finding a manual for the mill, it seems I would need to pull off the motor to gain access to the gears. While this was by no means impossible, I decided to use a link belt instead.
This may help you around your situation.
Hth
Rich