Yet Another Atlas Mill Thread - The Clueless Mfc

[CluelessNewB]

Given the limited work envelope of the Atlas Mill the MT2 collets might be the best option. Import MT2 holders are available also but the minimum size that I found was 3/16" and they appear a bit bulky.

 

[34_40]

Or you could buy a 1/16" to 1/2" set of 2MT collets. There is an outfit in Hong Kong who sell a set that is good quality. I have it and the 3MT set.

Can you expand on that info? What is the outfit specifically? Were they expensive?

 

[wa5cab]

Well, they no longer seem to have an Imperial 2MT set listed. Only in 3MT. But you might write them and inquire. Maybe they still have a few sets left. I bought both of my sets from them on eBay I think (and subsequently a few other things direct). As best I recall, the 2MT set (which is smaller as it can only go up to 1/2") cost $40-something. http://www.ctctools.biz/collet-sets-1/

 

[34_40]

Thanks

 

[CluelessNewB]

These pictures were taken a couple of weeks ago. The finishing touches, Dazor light and a cover to keep sawdust off.

 

[VSAncona]

That turned out great. Having gone through one of these machines myself, I can appreciate the amount of work you had to put in.

 

[34_40]

That's just beautiful CNB!

 

[Silverbullet]

Looks better then NEW , The gray paint just fits machinery , I did read you have two speeds on your motor or is the black switch for reverse? I'm going back and re-read that part. Just wanted to say you've done a great job on the rebuild. Also the cover is a great idea , I'm making covers for all of mine after I get them set up in my shop, I'm going to buy cheap moving blankets from HF between $5 +$7 each. I have heavy duty sewing machines for leather they can handle the job easy. Plus the quilting pattern sewn in gives strength. Thanks for sharing my atlas needs a couple parts but ill make the guard and the handle for the table. These finished builds inspire me to keep moving even being in a wheelchair I can do it all.

 

[A618fan2]

That turned out great. Having gone through one of these machines myself, I can appreciate the amount of work you had to put in.

+1 on that. Lotta parts go into that little machine - nice work!

John