What Did You Buy Today?

Finally these were delivered from far, far away.
PXL_20220923_214514194.jpg
A 22mm R8 gear arbor and an R8 FMB22 arbor to go with my face mill that I got earlier. You can see I have some gear cutters, well you can see one of them on the arbor. Now I can try my hand at cutting a gear. With the FMB22 arbor, I can use my face mill! Lots of fun to be had. I am pretty sure they are both 7/16-20 threads, but only the FMB is marked that way. I will have to go check both of them.

Also got some Bud Boxes for my ELS project, a 5x7 and a 10x12, the small one for my controller and display and the larger one for the stepper driver and stepper motor power supply.
PXL_20220923_190156052.jpg
Also some small M8-5 connector pairs, (panel plus mating cable type), an IEC power inlet with fuse and switch, and a power cord arrived today, for the ELS as well. There was some small electrical stuff that I didn't bother showing, like little polyurethane board feet, and some tiny terminal blocks.
PXL_20220923_215923802.jpg
And last but not least, a 12" piece of ground 303 stainless rod showed up. 1-1/2" diameter. Found this in the For Sale section on HM. Bought it just to have on hand.
PXL_20220923_220628091.jpg
Post Office tried to do a number on the rod package, but the contents arrive unscathed thanks to the good packaging.

All in all, a pretty good haul for the day.
 
I visited my buddy this morning and he made a very good deal on a handful of goodies. His dad owned a machine shop in the 50s & 60s, and these are some of the things he held onto and finally decided to sell. He has other cool things he's not ready to part with. The tap wrench was his dad's design and something he sold in quantity. It is well made and spring-loaded. It has 4 sizes from 3/32 (by eyeball), 1/8, 3/16, and 1/4". It was too cool to pass up. The larger threaded (3/8-16) fixture plate is stamped F.O. Bacon 1939.
Tap Wrench1.jpgTap Wrench2.jpgThreaded 90 Deg Fixture Plates.jpgAlbrecht 0-.375.jpgJacobs & Albrecht Chucks.jpg
I Beams.jpgStarrett 98-8.jpgIndexer2.jpgMachinist Jacks.jpgd
The indexer only has one plate, no name brand, and no collet closer for the 5C collets. Next to the indexer are the jacks with several different tops. There are three of them.
Starrett No 568 V-Blocks
Starrett No 568.jpg
 

Attachments

  • Large Angle Plate.jpg
    Large Angle Plate.jpg
    80.5 KB · Views: 10
  • Threaded Angle Fixture Plate.jpg
    Threaded Angle Fixture Plate.jpg
    81.2 KB · Views: 12
I visited my buddy this morning and he made a very good deal on a handful of goodies. His dad owned a machine shop in the 50s & 60s, and these are some of the things he held onto and finally decided to sell. He has other cool things he's not ready to part with. The tap wrench was his dad's design and something he sold in quantity. It is well made and spring-loaded. It has 4 sizes from 3/32 (by eyeball), 1/8, 3/16, and 1/4". It was too cool to pass up. The larger threaded (3/8-16) fixture plate is stamped F.O. Bacon 1939.
View attachment 421260View attachment 421261View attachment 421262View attachment 421263View attachment 421264
View attachment 421268View attachment 421269View attachment 421270View attachment 421271d
The indexer only has one plate, no name brand, and no collet closer for the 5C collets. Next to the indexer are the jacks with several different tops. There are three of them.
Starrett No 568 V-Blocks
View attachment 421272

I got some IBeams when I bought my Mill. What are they used for?


Sent from my iPhone using Tapatalk
 
Those are machining parallels…


I’d kind of guessed they were parralells of a sort, but hadn’t seen them like that before. My set of parallels (and all others I’ve seen) aren’t an ‘I’ shape and don’t have holes drilled down the length. Are these built to take larger weight, hence the ‘I’ shape?


Sent from my iPhone using Tapatalk
 
I’d kind of guessed they were parralells of a sort, but hadn’t seen them like that before. My set of parallels (and all others I’ve seen) aren’t an ‘I’ shape and don’t have holes drilled down the length. Are these built to take larger weight, hence the ‘I’ shape?


Sent from my iPhone using Tapatalk

(I should say I’ve only had time to skin through that video so far, so the answers to my questions may be in there)


Sent from my iPhone using Tapatalk
 
Someone here with more knowledge can answer… how to or what they are used for is not covered in the video… or why the shape…
 
I’d kind of guessed they were parralells of a sort, but hadn’t seen them like that before. My set of parallels (and all others I’ve seen) aren’t an ‘I’ shape and don’t have holes drilled down the length. Are these built to take larger weight, hence the ‘I’ shape?


Sent from my iPhone using Tapatalk
The only I-beam shaped parallels I'm aware of are 'shop made'. You can see they are a relatively simple project for beginners. The I-beam shape and multiple holes allows for use of multiple metalworking machines and processes including heat treating and grinding. The holes allow for more utility when clamping the parallel is desired. The configuration also reduces the weight of the finished parallels which becomes important by the time one has a box full of tools.

When I read your original question, parallels didn't come to mind. If you had included some dimensions or a picture (including some common object for scale reference) your question would have been more clear.

I-beams.jpg
 
Back
Top