Tail Stock Upgrade To 109 Craftsman

You have my condolences. :) Unfortunately, Craigs List is pretty poorly regulated and this sort of thing apparently happens frequently. Keep looking.
 
BUmme
98rangerll said:
Tryed to but someone beat me to it I emailed and called and told them to call or text and say when was good and I would be there but by the time they took my call they said someone just picked it up
Click to expand...
Bummer, but it's not the only one out there. If there's one thing life has taught me it's that another will be along sooner or later.

But for only 100 bucks, it'll probably be later rather than sooner.....:(
 
I went to a tail stock that was threaded 1/2 x 20 and went away from the mt 0 completely. I made a live center that threaded on to the tail stock. It made a large difference in the ridgidity of the lathe. It allowed me to thread longer shafts without problems. the only real problem is that the feed screw is left hand thread so I had to by a 5/16 24 left hand tap to thread the tail stock.

Art B
 
You must log in or register to reply here.
Back
Top