4
4GSR
Forum Guest
Register Today
My left over parts...
-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
- Joined
- Nov 8, 2011
- Messages
- 1,678
Damn, I don't see a chuck, wheel adapter anywhere in that picture:headscratch:
4
4GSR
Forum Guest
Register Today
Sorry Charlie!:whiteflag:
If youa'll get me the dimensions of the tapered arbor on your grinder, I'll dig up the one's I have stored up in the attic and see if they fit my SG first, then I'll let you know if they will work.:thinking:
Ken
If youa'll get me the dimensions of the tapered arbor on your grinder, I'll dig up the one's I have stored up in the attic and see if they fit my SG first, then I'll let you know if they will work.:thinking:
Ken
- Joined
- Nov 8, 2011
- Messages
- 1,678
Thanks, That wold be great, I'll measure them tonight.
4
4GSR
Forum Guest
Register Today
I finaly got around to test driving my surface grinder and breaking it in.
Here's a picture of regrinding the magnetic chuck. Not too bad for a surface grinder that was road hard and put to pasture filthy, dirty, and dry!
Oh BTW- I did regrind with the magnet turned on. I also learned real quick what grinding wheels worked and don't work very good on grinding the magnetic chuck.
Here's a picture of regrinding the magnetic chuck. Not too bad for a surface grinder that was road hard and put to pasture filthy, dirty, and dry!
Oh BTW- I did regrind with the magnet turned on. I also learned real quick what grinding wheels worked and don't work very good on grinding the magnetic chuck.