B
Bill Gruby
Forum Guest
Register Today
Way to go fellas, you are recovering nicely.
"Billy G"
"Billy G"
-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
Pass Around 2015
- Thread starter autonoz
- Start date
- Status
- Joined
- Sep 19, 2012
- Messages
- 3,063
When dealing with carpentry I believe it's okay to use fractional dimensions. : )
Sent from somewhere in east Texas!
Sent from somewhere in east Texas!
- Joined
- Dec 8, 2013
- Messages
- 2,651
You didn't mill the box out of a solid block of maple?
B
Bill Gruby
Forum Guest
Register Today
Justification --- Making yourself believe you really need this tool, then you justify it to the wife.
Tell yourself and the wife you need the mikes to verify that the fractions and decimals on that big chart you have really are the same.
"Billy G"
Tell yourself and the wife you need the mikes to verify that the fractions and decimals on that big chart you have really are the same.
"Billy G"
Hello all,
Firstly to everyone on the list for this box, I humbly apologize for my absence. I entrusted someone to drop it off to the past office for me while I was underway with my ship. At the same time, my family went through a move, and the box got packed with all of my tools. I sincerely hope you all can accept my apologies, for I have the box and will send it out personally on Monday. I was unaware of the situation as we were on a very, very limited Internet usage, which was primarily to email family, and I didn't think I needed to ask about the box. After reading through the thread, I'm slightly confused about where it needs to go. I hope Terrywerm or Autonoz will help out in that dept, and that I haven't cut ties with anyone in this community as it has literally stepped me through the first steps of learning this incredible trade.
Firstly to everyone on the list for this box, I humbly apologize for my absence. I entrusted someone to drop it off to the past office for me while I was underway with my ship. At the same time, my family went through a move, and the box got packed with all of my tools. I sincerely hope you all can accept my apologies, for I have the box and will send it out personally on Monday. I was unaware of the situation as we were on a very, very limited Internet usage, which was primarily to email family, and I didn't think I needed to ask about the box. After reading through the thread, I'm slightly confused about where it needs to go. I hope Terrywerm or Autonoz will help out in that dept, and that I haven't cut ties with anyone in this community as it has literally stepped me through the first steps of learning this incredible trade.
- Joined
- Sep 19, 2012
- Messages
- 3,063
Suki, It's great to hear you are OK.
I speak for myself that it seems like this was a colossal misunderstanding!
As for the box, I would suggest getting with Autonoz and see about sending it to the next person on the list. Odds get one box evens get the other. Then switching.
Sent from somewhere in east Texas!
I speak for myself that it seems like this was a colossal misunderstanding!
As for the box, I would suggest getting with Autonoz and see about sending it to the next person on the list. Odds get one box evens get the other. Then switching.
Sent from somewhere in east Texas!
- Joined
- Mar 3, 2015
- Messages
- 171
When I was working in the road building industry my boss told me that only whores and carpenters used inches.
- Status