- Joined
- Apr 20, 2013
- Messages
- 210
So I built a 3D printer a month or so ago called an Ord Bot Hadron. I think I am going to print up some parts for the lathe's motor slide/tensioner that uses a piece of barely damaged Makerslide I have (slight rub on the alum V so I did noot use it on my 3D printer).
I printed out some 5mm eccentric and concentric bushings tonight in ABS. I have a plate and some double V bearings already But I think I want to try and print my own plate and single V bearings in ABS since It will not get a ton of use anyway as a motor slide for the tensioner plus it will be cool to say I made it.
This is what Makerslide looks like.
A video of the Ord Bot Hadron 3D printer I built running:
[video=youtube;ZtK3zu2dSmI]
[/video]
I printed out some 5mm eccentric and concentric bushings tonight in ABS. I have a plate and some double V bearings already But I think I want to try and print my own plate and single V bearings in ABS since It will not get a ton of use anyway as a motor slide for the tensioner plus it will be cool to say I made it.
This is what Makerslide looks like.
A video of the Ord Bot Hadron 3D printer I built running:
[video=youtube;ZtK3zu2dSmI]
Last edited by a moderator:
